Bevel Gearmotor - Page 3
Small Gear motor Horizontal, Small Gear motor Vertical, Helical Gears High Gear motor, Vertical Gear box High Gear motor, Double shaft gear motor, Vertical 3 Phase ac induction motors, Bevel gear reducer, Mini Geared Motors, Electric motor three phase,
Gearmotors Types and Industrial Applications
21:54 26/11/2020
A geared motor is an all-in-one combination consisting of an electric motor and a gearbox. Used for high torque and low speed applications, it is a particularly simple and cost-effective solution to achieve optimal energy efficiency.
Sensors on the front lines of changing industrial world
03:11 26/11/2020
Sensors play a key role in many types of automation systems and machines, helping ensure they perform at their optimal level.
When To Use An Inverter Duty Motor vs Standard Motor
02:11 25/11/2020
With the increased use of Motor Drive packages, the question of “when to use an Inverter Duty Motor instead of a Standard Motor” often arises.
What Is an Inverter Duty Motor?
22:09 23/11/2020
Inverters were originally sold to be used with standard motors, but an increasing failure rate for inverter-fed motors led to the introduction of motors for inverter duty. These motors have a higher quality insulation and can withstand the voltage spikes generated by inverters.
Avoid over-specifying inverter-duty motors
02:05 23/11/2020
When combining a motor and inverter, the application should tell you what type of motor fits best. If you follow these guidelines, you can avoid more than is necessary.
DC gearmotor or AC gearmotor: What Are the Gains?
02:27 21/11/2020
A DC or AC gearmotor can either have in-line or right-angle gearing configuration. In-line modifications have lower backlash, thus providing more efficient speed-to-torque conversion and enhanced positioning accuracy.
Rotary Motors for Precision Positioning – What to Choose When?
02:11 20/11/2020
Over the years, electric motors have been continuously improved, driving the industrial revolution. The largest market segment for electric motors is in industrial and domestic mechanical power generation, driving machinery, and auxiliary equipment such as pumps and fans etc.
Understanding The Various Types Of Geared Motors And Their Applications
02:31 19/11/2020
Gearmotors are electric motors that use a sort of gear system on the motor’s output. This gearing configuration is known as a gear reducer or gearbox.
Top Benefits of Using Geared Motors
21:29 17/11/2020
Geared motors are the future of mechanical development. They are made up of a gearbox that is directly attached to the motor. This eliminates the need for a motor adapter and hookup since the motor pinion meshes straight with the high-speed gear in the gearbox.
5 Layout Ideas For Gear Motor Applications
02:27 17/11/2020
It is necessary to go into greater detail when choosing the best gear motor for an application than simply selecting the best fitting output speed and torque.
The Differences Between Spur And Planetary Gear Motors
03:15 16/11/2020
The two most popular types of gear motors for industrial use are planetary gear motors and spur gear motors. Choosing the right type of motor is vital to ensure optimum performance in your application.
Stepper Motors in Precision Motion Control and Positioning
01:13 14/11/2020
Brushless servo motors promote an extended service life for components in precision positioning.
Gear Motors in Precision Motion Applications
03:03 13/11/2020
Gear motors in precision positioning applications are used to provide higher torques and higher resolutions in a compact package and at reduced power requirements.
What is linear motion design engineering?
03:38 12/11/2020
Linear motion is an area of motion control encompassing several technologies including linear motors, linear actuators, and linear rolling guides and bearings, among others.
How to select and specify stepper motors
03:36 11/11/2020
Stepper motors are a good choice for many motion control applications, if they’re selected properly. Here’s a quick review of some key tips for making the right choice.
What is pole count and why does it matter?
03:35 10/11/2020
Simply defined, a pole is a north or south magnetic field of force that is generated by a permanent magnet or current passing through a coil of wire.
What are gearmotors and what do they do?
03:33 09/11/2020
A gearmotor is a single component that integrates a gear reducer with either an ac or dc electric motor. Thanks to its gearset, a gearmotor can deliver high torque at low horsepower or low speed.
How to Select a Gearmotor in Four Simple Steps
03:26 07/11/2020
Consider key design parameters when selecting a gearmotor for a motion control application.
How to calculate required input power for a gearmotor
22:45 05/11/2020
The first place to start when sizing a gearmotor is to determine the required output torque and speed.
Difference Between AC and DC Motor
02:39 05/11/2020
Electric motors are usually used to convert electrical energy to mechanical energy. The AC and DC motors are two types of electric motors. The concepts of AC and DC motors are popular among science students.
- Which types of DC motors can be used as servo motors? (23:34 03/11/2020)
- What are multi-stage gearboxes and when are they used? (22:56 02/11/2020)
- What are electromagnetic power-off brakes and where are they used? (22:51 01/11/2020)
- What are double- and triple-stack hybrid stepper motors ? (22:33 30/10/2020)
- What are different ways to express a gear ratio? (22:23 29/10/2020)
- What are the performance benefits of 5-phase stepper motors? (22:04 28/10/2020)
- Single-phase, two-phase and three-phase motors: all you need to know (03:21 28/10/2020)
- Steps to calculate a gear ratio (03:12 26/10/2020)
- Applications and advantages of using gear motors (04:51 24/10/2020)
- AC Gear Motors leveraging Torque-Boosting Power (04:41 23/10/2020)
Join