What is a planetary gearbox?

Tuesday - 13/03/2018 08:41

What is a planetary gearbox?

As a supplier of gearboxes and gearmotor, of course we know all ins and outs, but what if you encounter this technique for the first time?
We have decided to explain it clearly for all – In this article we discuss the basics of the planetary gearbox.
 
What is a planetary gearbox?
 
A planetary gearbox is a gearbox with the input shaft and the output shaft aligned. A planetary gearbox is used to transfer the largest torque in the most compact form (known as torque density).
 
planetaire tandwielkast principe
 
The bicycle’s acceleration hub is a great example of a planet-wheel mechanism: Have you ever wondered how you can get so much power and capabilities in such a little hub?
 
For a three-speed hub, a one-stage planetary gear system is used, for a five-speed hub a 2-stage. Each planet gear system has a reduction state, a direct coupling and an acceleration mode.
 
In mathematical terms, the smallest reduction ratio is 3: 1, the largest is 10: 1. At a ratio of less than 3, the sun gear becomes too big against the planet gears.
 
At a ratio greater than 10 the sun wheel becomes too small and the torque will drop. The ratios are usually absolute i.e. an integer number.
 
Why is it named a planetary gearbox?
 
The planetary gearbox got its name because of how the different gears move together. In a planetary gearbox we see a sun (solar) gear, satellite (ring) gear and two or more planet gears.
 
Normally, the sun-gear is driven and thus move the planet gears locked in the planet carrier and form the output shaft. The satellite gears have a fixed position in relation to the outside world. This looks similar to our planetary solar system and that is where the name comes from.
 
catalogues
 
What helped was that ancient gear constructions were used extensively in astrology for mapping and following our celestial bodies. So it was not such a big step to make.
 
In practice, we often speak from the perspective of the use of planetary gearboxes for industrial automation. That is why we call the sun-gear the input shaft, the planet gears and carrier the output shaft and the satellite gear (or ring gear) the housing.
 
Possibilities of planetary gearboxes
 
It is possible to realise different speeds and turning directions with the same construction. This can be achieved by, for example reversing the gearbox, which offers the following possibilities:
 
Driven side Solid world To be driven side Result
Input shaft Housing Output shaft Reduction
Input shaft Output shaft Housing Reverse movement + Delay
Output shaft Input shaft Housing Delay
Output shaft Housing Input shaft Acceleration
Housing Output shaft Input shaft Reverse movement + Acceleration
Housing Input shaft Output shaft Delay
In- and output shaft N.A. Housing 1:1
 
 
Where is the planetary gearbox usually used (in the transmission):
 
In a robot to increase the torque
 
In a printing press to reduce the speed of the rollers
 
For precise positioning
 
In a packaging machine for a reproducible products
 
Buying a Planetary Gearbox: What should you pay attention to
 
What are the purchase criteria for a planetary gearbox? That is a difficult to answer question, because it is highly dependent on where the gearbox is used precisely. First of all, the primary specifications (eg.: torque, backlash, ratio) must be correct, but then the secondary (eg.: corrosion resistance, noise level, construction) and the tertiary (eg.: delivery time, price, global availability, service) are important.
 
Because Dolin machines runs faster, you can contact us for all your questions. We will reply fast, often the same day, with a customised response and/or customised offer. This way, you never have to worry about a delay, we deliver every gearbox out of stock and faster than anyone else.
 
Grease or oil as lubricant in planetary gearbox
 
Even with how precisely the planetary gearbox is manufactured and assembled, there are always rolling or sliding surfaces inside.
 
That’s why each gearbox contains a lubricant – whether it’s oil, grease or a synthetic gel – to ensure the gears function well and prevent wear.
 
In addition, the lubricant often also provides cooling and reduces noise or vibration. Dolin machines uses a special lubricant from the company Dolin, in fact it is a kind of gel.
 
We published an article about this subject:
SMART Lubrication: Without lubricant no smooth gear!
6 arguments for a planetary gearbox in combination with a servo motor
 
The torque is divided over 3 gears (the planet gears), and therefore – at equal dimensions – the torque is almost 3-fold than a “normal” gearbox.
 
Low backlash.
 
Compact and therefore a low mass inertia.
 
High efficiency.
 
Closed system.
 
Absolute ratios between 3: 1 and 10: 1 per stage.
 
 

Total notes of this article: 9890 in 4108 rating